| Diameter | Thickness Production Capacity | ||
|---|---|---|---|
| CR | HR | GI | |
| ◯ Round tube | Rrange of thickness | Rrange of thickness | Rrange of thickness |
| Ø 12.0 | 0.55-1.2 | 0.7-1.2 | |
| Ø 12.7 | 0.55-1.4 | 0.7-1.4 | |
| Ø 15.9 | 0.55-2.0 | 1.4-2.0 | 0.7-1.8 |
| Ø 18.0 | 0.55-2.0 | 1.4-2.0 | 0.7-1.8 |
| Ø 19.1 | 0.55-2.0 | 1.4-2.0 | 0.7-2.0 |
| Ø 20.0 | 0.55-2.0 | 1.4-2.0 | 0.7-2.0 |
| Ø 20.9 | 0.55-2.0 | 1.4-2.3 | 0.7-2.3 |
| Ø 21.3 | 0.55-2.0 | 1.4-2.3 | 0.7-2.3 |
| Ø 22.2 | 0.55-2.0 | 1.4-2.5 | 0.7-2.5 |
| Ø 24.0 | 0.55-2.0 | 1.4-2.6 | 0.8-2.8 |
| Ø 25.4 | 0.55-2.0 | 1.4-3.0 | 0.8-3.0 |
| Ø 26.7 | 0.55-2.0 | 1.4-3.0 | 0.8-3.0 |
| Ø 27.0 | 0.55-2.0 | 1.4-3.0 | 0.8-3.0 |
| Ø 28.6 | 0.55-2.0 | 1.4-3.2 | 0.8-3.2 |
| Ø 31.8 | 0.7-2.0 | 1.4-3.2 | 0.8-3.2 |
| Ø 33.4 | 0.7-2.0 | 1.4-3.2 | 0.8-3.2 |
| Ø 35.0 | 0.7-2.0 | 1.4-2.0 | 1.0-2.0 |
| Ø 38.1 | 0.7-2.0 | 1.4-3.2 | 1.0-3.2 |
| Ø 40.0 | 0.7-2.0 | 1.4-3.2 | 0.8-3.2 |
| n Ø 41.3 | 0.8-2.0 | 1.4-3.2 | 1.0-3.2 |
| Ø 42.0 | 0.8-2.0 | 1.4-3.2 | 1.0-3.2 |
| Ø 44.5 | 0.9-2.0 | 1.4-3.2 | 1.0-3.2 |
| Ø 45.0 | 0.9-2.0 | 1.4-3.2 | 1.0-3.2 |
| Ø 48.0 | 0.9-2.0 | 1.4-3.2 | 1.0-3.2 |
| Ø 50.0 | 0.9-2.0 | 1.4-3.2 | 1.2-3.2 |
| Ø 50.8 | 0.9-2.0 | 1.4-3.2 | 1.2-3.2 |
| Ø 55.0 | 1.0-2.0 | 1.4-3.2 | 1.2-3.2 |
| Ø 57.2 | 1.0-2.0 | 1.4-3.2 | 1.2-3.2 |
| Ø 60.2 | 1.0-2.0 | 1.4-3.2 | 1.2-3.2 |
| Ø 63.5 | 1.2-2.0 | 1.4-3.2 | 0.8-3.2 |
| Ø 64.5 | 1.2-2.0 | 1.4-3.2 | 0.8-3.2 |
| Ø 70.0 | 1.2-2.0 | 1.4-3.2 | 0.8-3.2 |
| Ø 76.2 | 1.2-2.0 | 1.4-3.2 | 1.4-3.2 |
| Ø 82.6 | 1.4-2.0 | 1.4-3.2 | 0.8-3.2 |
| Ø 89.0 | 1.4-2.0 | 1.4-3.2 | 1.4-3.2 |
*n: Open molds on behalf of customers.
#: Other thicknesses are ordered according to customer needs.